UGS/CGS Output Cap, Type 2 Wire Harnesses The Type 1 is designed

The Type 1 is designed for use with AEG receivers that accept 1-3/16"-16 threaded buffer tubes such as the G&P R3 series

The top of the board is designed to lock into the spur gear pocket in the gearbox and is secured by the delrin pin which locks into the spur gear bushings

It's not magic

While it may not be able to hit as high of a velocity in the maximum pressure range as it would have with the standard poppet valve

it’ll add just the right amount of edge to your look

UGS/CGS Output Cap, Type 2 Wire Harnesses The Type 1 is designedType 2 output cap for both UGS or CGS air systems. Since the regulator on the UGS and CGS are identical with the exception of the output cap, one can convert between the different types by simply swapping the output cap. When converting a Type 1 to a Type 2, you will need the UGS CGS Type 2 Output Barb Fitting and UGS CGS Type 2 Hardware Set which is sold separately.