7270-1 Series Circuit Breaker | 10 Amp Rating, Toggle Actuator 1510-12 The KA 40 marker light

The KA 40 marker light kit is used in conjunction with the KNR 634A receiver

The back of the remote switch contains the connector for the already installed and re-used ""telephone wire"" of the ACK or Ameri-King ELT installation

The built-in pressure sensor indicates altitude warnings at 10

Use it when heat shrink products are not applicable

PX heat shrink labels are up to 125°C

7270-1 Series Circuit Breaker | 10 Amp Rating, Toggle Actuator 1510-12 The KA 40 marker lightThe Klixon(R) 7270 series circuit breakers are designed to utilize less space behind the panel while protecting wire and cable in aircraft and ground support equipment on 120 VAC, 400 Hz or 30 VDC systems. Inherently resistant to shock and vibration, the disc element is capable of calibration within close tolerances throughout the service life of the breaker. The 7270 1 series circuit breaker feature a single pole, toggle actuator. Includes hardware.